Allen-Bradley 2711-T5A16L1 PanelView Standard Terminal

Description 

The Allen-Bradley 2711-T5A16L1 is a PanelView 550 Standard Operator Terminal. This operator terminal is powered by an external 18-30VDC supply voltage and has a 5.5-inch monochrome display with embedded RS232 that supports DF1 protocol and another RS232 port for printer interface. It has an analog resistive touchscreen operator interface.

Technical Specifications 

Information About 2711-T5A16L1

The 2711-T5A16L1 is a Panel 550 series Human Machine Interface device. It is designed with a blue monochrome LCD touch screen featuring a monochrome display screen of 5.5 inches. The 2711-T5A16L1 comes with an operating ambient temperature code of 300 degrees Celsius and should not be installed in an environment where the atmospheric gases have an ignition temperature less than 300 degrees Celsius. The 2711-T5A16L1 meets the EMC directive 89/336/EEC and the electromagnetic compatibility, as well as the amending directives. This module is required to be kept in an enclosure that helps to ensure that its internal circuitry is protected. During the installation process, it is important to verify that there is enough space within the enclosure, as adequate ventilation is highly important for this module.

The 2711-T5A16L1 meets NEMA type 12/13 and 4X ratings when properly mounted in a panel or enclosure with an equivalent rating. The 2711-T5A16L1 features a resolution of 256 by 128 that is part of the PanelView 550 series. It comes with a 24 Volt DC power featuring an application runtime internal memory of about 170 KB. The 2711-T5A16L1 features support for touch screen graphics input. The LCD is also illuminated through the use of a halogen lamp, which is replaceable when it reaches its limit. The illumination lamp can be switched on and off and supports a timed mode as well. To ensure network connectivity, the 2711-T5A16L1 features an RS-232 (DF1) communication port that links to the DF1 port used on any MicroLogix, any PLC, or any SLC controllers. After installation, the DF1 screen allows users to view and edit the DF1 or the full duplex communication setting for the DF1 PanelView terminal. The unit also features an RS-232 printer port that connects with the printing device.

The primary intended function of the 2711-T5A16L1 is to provide plant operators and machine users to monitor and control the plant from a central location in the factory floor area. This is enabled by way of the integrated 5.5-inch display with support for monochrome graphics. The display area of the screen is 256 x 128 pixels with viewing area of 120 x 60 mm (4.75 x 2.38 in.). It has a backlight with operational lifespan of 100,000 hr LED backlight life. Additionally, control and process interaction is introduced via the embedded 128 touch cells that is designed to operate up to 1 million actuations. It allows direct actuation of runtime objects to implement the necessary control, modification, and navigation commands to the system.

The 2711-T5A16L1 is mounted to an enclosure NEMA Type 12/13, 4X (Indoor use only), IP54, IP65. Maintain an operating temperature of 0…55 ° C (32…131 ° F) by installing devices such as heater or cooler and considering the terminal’s heat dissipation of 20 W (69 BTU/HR).

The 2711-T5A16L1 has an internal memory of 240K bytes (application screens) for Series E or later and 112K bytes (application screens) for Series E and lower. It has an operating shock of 30 g/ and operating vibration of 2 g up to 2,000 Hz.